Page Index:
1
2
3
4
5
6
7
Download:
PDF Manual
|
Java Based Setup Utility |
Latest Firmware Patch
|
Virtual COM Port Driver
See Also:
eCOV-100 Basic Model.,
eCOV-132X Box Model, and eCOV-432
Server Model
Serial-Ethernet Converter FAQ
Barcode Scanner | Magstripe Card
Reader / Writer
|
POS Customer Display |
POS Keyboard
Touchscreen POS System | Cash Drawer
|
Serial-Ethernet Converter |
Receipt
Printer
5.5.Setup the second HyperTerminal program for
the TCP Client order at Host PC side.
Ø Open
another HyperTerminal, and select ”TCP/IP (Winsock)” method.
Ø Setup
the Network parameter for eCOV-110.
Ø Establish
TCP/IP Connection
eCOV-110 IP Address
eCOV-110 TCP Listen Port
5.6.Data Transfer Test
Ø Input
any data with the keyboard on either HyperTerminal screen, the data will be
displayed on another HyperTerminal screen.
Appendix A.
eCOV-110 Firmware Upgrade
1. Setup
Environment
Ø Connect
eCOV-110 DB9 port with null modem cable (Note #1) to PC’s COM Port
Ø Connect
eCOV-110 RJ45 port to PC LAN port via switch or cross-over cable
l If
PC’s LAN setting is configured by DHCP mode and connected to eCOV-110 via
cross-over cable, please assigned a IP
address, like 192.168.2.1. Otherwise, the utility
will not find the eCOV-110 on LAN and the
upgrade procedure will be not operated.
Ø Plug-on
correct power
eCOV-110: 5V~9V DC, >300 mA
Note #1:
Normally, PC equips with male COM port DB9
connector, so it is an 8- wire NULL Modem cable
and its pin out should be same as below:
DB9 female
connector type
DB9 female
Pin No
Pin No
1
ßà
1
2
ßà
3
3
ßà
2
4
ßà
6
5
ßà
5
6
ßà
4
7
ßà
8
8
ßà
7
9
X
9
Ethernet Switch
Host PC
eCOV-110
RS-232 Cable
COM
Port
Ethernet
Port
Ethernet
Cable
Power Adaptor
eCOV-110: 5-9V
2. Setup Java
Environment
The eCOV-110 manager utility, “SeManager.jar”
is coded by JAVA language, so the PC needs
to install JAVA run-time and JAVA COM object.
Both they are needed to installed one-time in
the beginning.
Ø Check
if JAVA Runtime installed
l Please
check in the [Control Panel][Add/Remove program]
l If
it is not installed, please download it from internet.
-
Download JAVA runtime (J2EE 1.4 or J2SE 5.0)
from http://java.sun.com/
-
Install it step by step
Ø Install
JAVA COM Object
l The
JAVA COM object is necessary for COM port application for JAVA program
l Install
the “CommInstall.Jar” which is included in shipped CD, it will copy 3 JAVA
COM objects to the corresponding sub-folder
of the JAVA Runtime.
3. Start
eCOV-110 firmware upgrade
** Please double check that RS-232 and
Ethernet are both connected to PC
Ø execute
eCOV-110 manager utility: SeManager.jar
Network checking will be done once again
automatically when executes
manager utility.
Ø Start
firmware upgrading
l Lock(Click)
the target eCOV-110 by mouse cursor, “Upgrade” icon will show in the
left site of utility
l Click
the “Upgrade” icon, then a new menu pop-up
